Automated Temperature Control Table Fan

Link to download the ZIP file Of Sensor --

https://drive.google.com/open?id=1nTU1NomKXuqDLDi0NtgX5DG56KWWmsfR


Link for download the Arduino Display App--

https://play.google.com/store/apps/details?id=com.jojoagogogo.ad


Copy the code from here---


//Temperature Control Table Fan //SUBSCRIBE to Our Channel For More Videos "SAYAN DALAL" #include <dht11.h> #define DHT11PIN 4 // connect DHT 11 sensor to PIN 4 #define relay 3 // connect Relay module to PIN 3 dht11 DHT11; void setup() { Serial.begin(9600); pinMode(relay,OUTPUT); } void loop() { Serial.println(); //Display in Mobile Screen int chk = DHT11.read(DHT11PIN); Serial.print("Humidity (%): "); Serial.println((float)DHT11.humidity, 2); Serial.print("Temperature (C): "); Serial.println((float)DHT11.temperature, 2); if(DHT11.temperature >35) // set your temperature, i set at 35 C { digitalWrite(relay, LOW); } else { digitalWrite(relay, HIGH); } delay(2000); // Check the Temperature after 2 sec }

139 views

Recent Posts

See All