Control 775 motor Using Smart phone

Items You Need --

1. Arduino Uno--https://www.myinnovation.in/product-page/arduino-uno

2.Bluetooth Module --https://www.myinnovation.in/product-page/hc-05-bluetooth-module

3. 5v Relay Module --https://www.myinnovation.in/product-page/relay-module-2-pcs

4. 24v Battey --https://www.myinnovation.in/product-page/24v-lithium-ion-battery-pack

5. 775 Bearing Motor--https://www.myinnovation.in/product-page/775-bearing-dc-motor-12-24v

6. Volt & Amps Display --https://www.myinnovation.in/product-page/volt-amps-meter


Copy The Code From Here ---


void setup()

{ Serial.begin(9600); pinMode(9, OUTPUT); // put your setup code here, to run once: } void loop() { // put your main code here, to run repeatedly: if(Serial.available()>0) { char data= Serial.read(); // reading the data received from the bluetooth module switch(data) { case 'o': digitalWrite(9, HIGH);break; // when a is pressed on the app on your smart phone case 'f': digitalWrite(9, LOW);break; // when d is pressed on the app on your smart phone default : break; } Serial.println(data); } delay(50); }

385 views

Recent Posts

See All

Code for Automated Hand Wash By Arduino Uno

Copy the Code here ---- #include <Servo.h> #define irsensor 3 // connect the IR sensor to PIN 3 Servo myservo; int pos = 0; // variable to store the servo position void setup() { myservo.attac